Scrape + Go: Stomp Pad + Ice Scraper w/ MagLock™ System
- FREE SHIPPING FOR ORDERS OVER $80
- TRY IT RISK FREE FOR 30 DAYS
- PATENT PENDING DESIGN
Share
Collapsible content
Features
✔ Built In Ice Scraper – Remove ice FAST for bindings, boots, and boards
✔ High-Grip Stomp Pad – Traction pattern keeps you in control when you’re not strapped in.
✔ MagLock™ System – High-Strength magnets keep your ice scraper locked & easily accessible on your stomp pad while you're riding
✔ Glove-Friendly Design – Grab the scraper without exposing your hands to the cold. Scraper snaps back in either way!
✔ Low-Profile & Lightweight – Compact design stays out of the way but performs when it matters.
✔ Board-Safe Materials – Durable scraper removes ice quickly without scratching your board or bindings. Adhesive is strong but removable.
✔ 4 Customizable Colors – Mix and match scraper + stomp pad colors to express your style and match your board.
✔ Rider-Built Innovation – Designed by snowboarders, self-funded, and engineered for real mountain conditions. NO CORPORATIONS! We thank you for your support 🙇🙏
Details
Scrape + Go is the world’s first magnetic snowboard stomp pad + ice scraper combo, engineered to eliminate icy bindings and keep you riding without the hassle. Instead of scraping ice with your cold fingers or digging through your pockets for that tool you thought you had, you can pop the scraper off your board, clear your gear in seconds, and snap it right back into place with our MagLock™ System.
At the core of Scrape + Go is MagLock™ System, a magnetic system using ultra-strong N52 neodymium magnets to lock in the scraper on the stomp pad. The scraper docks in either direction, with a quick release strap, making it glove-friendly fumble free in blizzard conditions. The MagLock™ System stays locked in through vibration, carving, cold, and impact.
The engineered high-grip stomp pad provides stable traction when skating, unloading, or riding with one foot out. It has a sleek profile, just 4.6" × 2.6" × 0.16", designed to grip without getting in the way. The system installs using a strong yet removable industrial-grade adhesive, giving you season-long hold with the ability to remove it when needed.
Scrape + Go comes in four colorways, allowing you to mix and match the stomp pad + scraper to match your board, bindings, boots, or your personal style. Whether you prefer a clean, stealthy setup or a bold, standout color pop, you can customize your ride your way.
The scraper itself is crafted from a durable, board-safe polymer that removes ice instantly without scratching your board or bindings. Combined with a glove-friendly pull strap, it delivers quick, reliable access on every lift and every run.
Designed, tested, and refined by snowboarders, not corporations! Scrape + Go is a patent-pending design and is a truly rider-built innovation created to solve a real mountain problem. Supporting MagSnow means supporting a snowboarder who loves bringing innovation to our sport & experience!
Shipping & Returns
Get Free Shipping on Orders Over $80 in the US! If you're outside the US contact me and I can arrange shipment 😀🚚
If you are unsatisfied for any reason, email magsnowofficial@gmail.com, I personally design, make, and ship all the parts I want to make sure I make and deliver the best product possible.
Warranty & Returns
1 year warranty against manufacturing defects.
30 days return policy. if you're unsatisfied for any reason, just email magsnowofficial@gmail.com.
Our Story
MagSnow began with a simple frustration every rider knows: frozen bindings. Snow packs in, melts, refreezes on the lift, and suddenly you're scraping ice with your hands, keys, or whatever’s in your pocket. As a longtime snowboarder and mechanical engineer, I wanted a solution that was durable, simple, and actually worked in real conditions. I’ve always loved magnets, so the idea for a board-mounted, magnetic scraper came naturally. After 20+ prototypes, plenty of failures, and help from friends testing on the mountain, the design became tougher, easier to use, and fully glove-friendly. Even early versions survived heavy falls! Proof the magnetic system could handle real impact. MagSnow wasn’t built in a lab or by a big brand. It was built by a rider & engineer who got tired of the same problem and decided to fix it. Scrape + Go exists to improve the snowboarding experience. Simple, reliable gear, made by someone who actually rides.
Meet The Inventor
I’ve been snowboarding for years, and one thing always annoyed me… scraping ice off my bindings with cold hands... and because I’m clumsy, I always end up getting snow inside my gloves.
I’m an engineer and a product-design nerd at heart, so I started sketching ideas to fix this. That led to countless prototypes, endless magnet experiments, and a lot of failures. But each version got me closer.
Every detail of MagSnow: Scrape + Go was intentionally engineered, from the stomp pad shape that guides the scraper in naturally, to the way the scraper releases cleanly from strong magnets. I designed for every edge case I could think of, to be used when you're out in the elements and all you want to do is ride
I build and assemble everything at home. No big team. No corporate budget. Just me, trying to make snowboarding a little easier for people like us.
That’s how MagSnow was born! A magnetic stomp pad + scraper that actually works, and actually stays put.
– Andrew Wilkinson, Founder & Inventor
Fantastic tool for scraping ice off your bindings. The magnet makes sure you never lose this trusty tool! Like a windshield scraper for your board! 10/10
From frosty lift beers at the base of the mountain, to frosty bindings at the top, whether I’m using the scraper to crack my next brew or crack through the ice in my bindings, the Magsnow scraper is a mandatory go to. Don’t be the guy buying the next round of beers for the group at McCoy because you were the last one down blaming your icy bindings. Rack out the snow and off you go! Remember a chase is a race.
I got tired of scraping snow off my board and bindings with my gloves and ruining them! This is the perfect setup to keep built up ice off my board! 10/10! 🤙🏾
Best tool out there for getting ice off of your bindings. A must have for cat skiing/backcountry trips. A powder hounds best friend!
I love my MagSnow!! I used to be messing around with ice on my bindings but every since I got this magnetic scraper and stomp pad I’m always the first one out of my snowboarder friends to strap in, I almost understand how skiiers feel about waiting for their snowboard friends. This thing has come in handy for other uses too like scraping off my board before I put it in my car, a small pry bar to open my bindings free I ride if I need to adjust it. Never riding without one again!
FAQ
Collapsible content
How Do I Attach This On My Snowboard?
We provide a high quality 3M adhesive that is resistant to both wet and cold, your Scrape + Go will be securely attached to your board, and the high strength Neodymium magnets keep the ice scraper securely attached
How Does The Scraper Attach To The Stomp Pad?
Our patented MagLock™ technology utilizes N52 Neodymium magnets (the highest strength & grade available) to keep the Scraper attached within the housing. The housing has an edge which prevents it from flying off in the X & Y axis. Our unique design allows the Scraper to be inserted into the housing either way, to prevent fumbling.
Does The Scraper Attach Both Ways?
Yes! The scraper attaches bi-directionally. This was thoughtfully designed so when you are in the elements you are not fumbling around figuring out which side to magnetically attach the scraper.
Will I Lose The Scraper?
As long as you securely return the ice scraper into the magnetic housing 99% of the time you will not lose it. We have conducted extensive testing and tweaking to ensure our design has the highest strength possible. For the scraper to eject off you would essentially have to crash in a way that would destroy or damage your snowboard at a very specific angle which we had failed to emulate in a real world scenario. We do not condone any dangerous behavior to test our product.
In the off chance your scraper wasn't securely attached and or you have lost it, we sell the Scraper only as well. We offer a variety of color so you can personalize your snowboard!
Is This Patented?
Yes, we have a Patent-Pending Utility patent. So this is the only place you can get this product!
Are You A Corporation?
Absolutely not! I'm Andrew, a snowboard enthusiast and mechanical engineer, I had the problem of my bindings getting iced up and I had the choice of riding with ice under my foot (super uncomfortable and sometimes gives way - sketch) or take off my glove and try to chip the ice away. Depending how thick the ice was it would really slow me down, my skiier friends were waiting for me. I thought of this cool solution, and after a year of prototyping, I am ready to present you the Scrape + Go.
This is totally self funded, I make, assemble, pack & ship everything myself. Let me know in any way how I can improve the product I'm always open to feedback! Your support is super appreciated and you are literally helping me grow my business and achieve my dream of creating a product in the snowboard space.
Why Do I Need This?
Because it's the best stomp pad on the market. It not only is a stomp pad, it has an ice scraper magnetically attached, so its always easily accessible right on the top of your board.
Ice on your binding? You're probably already bending down to strap in just grab the scraper and remove that pesky ice and make sure you have a flat and secure surface to shred!
Ice on your board at the end of the day? Use the scraper to remove ice and snow from your board before you bring it in your car, your house, wherever. Many times I'm left with puddles in the back of my car because I didn't have a scraper!
Why Do My Bindings Ice Up?
As you ride, snow accumulates in your bindings and your boots heat up from body heat + friction, leading to the snow melting, while you're riding the list that moisture freezes and becomes ice on your bindings. That's why even if you don't unstrap during your run, you will face this problem.
Can I Remove It From My Snowboard?
Absolutely, for whatever reason if you would want to remove your Scrape + Go, take a heat gun or hair dryer and slowly heat up the entirety of the adhesive. Start from one corner and slowly heat and peel. Do not rush this, if you try to peel it without the adhesive properly heating up you risk damaging the top sheet of your board. However, if you wait for it to heat up, the adhesive turns from a solid to an elastic and can be removed. We use a high quality adhesive to make sure your Scrape + Go never falls off your snowboard for your safety and everyone around you.
